Camera super clamps can turn a table edge, light stand, shelf, or crossbar into a practical mounting point for interview gear. The right setup helps position monitors, compact cameras, lights, microphones, and accessories without adding another tripod.
We’ve selected 10 versatile clamps and clamp-and-arm kits, ranging from compact budget options to heavier-duty models. Below, you’ll find the key differences to consider before choosing one for your studio, location, or mobile interview setup.
Best 10 Camera Super Clamps for Interviews Picks for 2026
Best Compact Camera Clamp
ULANZI 360° Ballhead Super Clamp
- 60mm maximum jaw opening
- 1.5kg load capacity
- Includes action-camera adapter
Best For: Lightweight interview cameras, monitors, and lights
Best Heavy-Duty Pair
SmallRig Super Clamp Kit 2-Pack
- 33.1lb stated load capacity
- Fits 10–60mm round tubes
- Includes two clamps and studs
Best For: Heavy interview rigs and multi-point studio setups
Best Four-Pack Value
- Four clamps in one kit
- 12–54mm adjustable jaws
- 1/4-inch and 3/8-inch threads
Best For: Multiple lightweight interview accessories
Best Integrated Magic Arm
- Built-in 3-inch dual-ballhead arm
- 6.6lb stated payload
- Cold shoe and 1/4-inch mounting points
Best For: Flexible camera, monitor, light, and microphone positioning
Best for Easy Setup
- Supports up to 7.7 pounds
- Fits rods and surfaces up to 2.56 inches
- Multiple 1/4-inch and 3/8-inch mounting holes
Best For: Compact interview rigs and accessory mounting
Heavy-Duty Studio Clamp
- Supports up to 33 pounds
- Grips round or flat surfaces
- Includes a 5/8-inch stud and 1/4-inch thread
Best For: Heavy interview lighting and studio rigs
Heavy-Duty Pick
LEOFOTO MC-60 Multipurpose Super Clamp
- 5kg load capacity in a compact body
- Fits rods and pipes up to 55mm
- Two 3/8-16 holes plus adapter
Best For: Strong, expandable interview mounting setups
Compact Angle Control
CAMVATE Super Clamp with Mini Ball Head
- 360-degree rotating mini ball head
- 54mm maximum clamp opening
- Supports up to 3kg
Best For: Lightweight rigs requiring flexible positioning
Flexible Rigging Choice
NEEWER ST16C 11-Inch Magic Arm Clamp
- 11-inch articulating magic arm
- 360-degree rotation and 90-degree tilt
- 2kg maximum load with ARRI locating features
Best For: Adjustable interview accessory positioning
Best Compact Camera Clamp – ULANZI 360° Ballhead Super Clamp
For camera super clamps for interviews, the ULANZI is a compact option for mounting a camera, monitor, light, or microphone to rods and handles. Its 60mm jaw opening, adjustable ballhead, and protective rubber pad suit lightweight interview setups where positioning flexibility matters.
Best For: Small cameras, monitors, action cameras, and lights weighing up to 3.3 pounds.
Pros:
- 360° ballhead helps adjust the mounted accessory during shooting.
- Supports 1/4-inch and 3/8-inch accessories, plus the included action-camera adapter.
- Clamps onto surfaces and rods up to 60mm wide.
- Aluminum construction and rubber padding help provide a sturdy, scratch-resistant grip.
Cons:
- Its 1.5kg load rating is intended for lighter equipment rather than heavy cinema rigs.
- The product is not water resistant.
This is a practical choice for interviewers who need a small, adjustable mounting point for a monitor, light, or compact camera. Check the equipment weight before using it with a fully built-out rig.
Best Heavy-Duty Pair – SmallRig Super Clamp Kit 2-Pack
For demanding camera super clamps for interviews, the SmallRig two-pack offers a much higher stated load capacity than lightweight clamp kits. Each aluminum-alloy clamp accepts threaded accessories and can grip tubes, tables, tripod legs, C-stands, and stabilizer handles.
Best For: Interview crews that need two high-capacity clamps for cameras, microphones, monitors, or video lights.
Pros:
- Supports up to 33.1 pounds according to the supplied specifications.
- Clamps round tubes from 10mm to 60mm and flat objects up to 30mm with the removable wedge.
- Includes 5/8-inch studs with 1/4-inch-20 and 3/8-inch-16 top screws.
- Integrated protective pads improve grip and help protect clamped surfaces.
Cons:
- The kit weighs 2.5 pounds, so it is less convenient when minimizing rig weight.
- It is not water resistant.
This is the most suitable option here for larger interview rigs or setups requiring multiple mounting points. Its broad compatibility and two-clamp configuration make it useful for studio and location production alike.
Best Four-Pack Value – QYXINC 4-Pack Super Clamps
If you need several camera super clamps for interviews, this four-pack provides multiple mounting points for rods, shelves, crossbars, hooks, and lights. The adjustable jaws cover 12mm to 54mm, while the 1/4-inch and 3/8-inch threaded holes support common photo accessories.
Best For: Budget-conscious interview setups that need several clamps for lightweight accessories.
Pros:
- Four clamps provide flexibility for building out a multi-accessory setup.
- Adjustable jaws accommodate objects from 12mm to 54mm.
- 1/4-inch and 3/8-inch threads support a range of mounting accessories.
- Anodized aluminum alloy, stainless steel, and rubber pads support durability and grip.
Cons:
- The supplied maximum weight recommendation is only 120g, limiting use to very light accessories.
- No magic arm or accessory adapter is included.
- The product is not water resistant.
This kit makes sense when quantity matters more than heavy-duty capacity. Use it for lightweight microphones, small lights, hooks, or other accessories, and avoid treating it as a primary clamp for a heavy camera.
Best Integrated Magic Arm – NEEWER ST83 Super Clamp
For camera super clamps for interviews that need fast angle changes, the NEEWER ST83 combines a clamp with a 3-inch dual-ballhead magic arm. It grips poles and flat surfaces, includes a cold shoe and 1/4-inch mounting points, and supports cameras, phones, monitors, lights, and microphones.
Best For: Interview shooters who want an all-in-one clamp and flexible accessory arm.
Pros:
- Dual 360° ballheads allow flexible positioning for recording and monitoring.
- Clamps poles from 14mm to 60mm and can attach to desks, tripods, stands, and handles.
- Includes 1/4-inch threads, ARRI locating points, and a built-in cold shoe.
- Stated maximum payload is 6.6 pounds, with nonslip pads for stability.
Cons:
- It is not suitable for on-camera speedlite flashes.
- The product is not water resistant.
- Only one clamp is included.
The ST83 is a strong middle-ground choice when an interview rig needs both secure clamping and quick angle adjustment. Its integrated arm reduces the need to buy a separate clamp-and-arm combination.
Best for Easy Setup – SmallRig Super Clamp
For camera super clamps for interviews, the SmallRig Super Clamp is a compact option for attaching a camera, monitor, LED light, or action camera to compatible rods, tables, handlebars, tripods, and stabilizer rings. Its adjustable jaw and multiple threaded holes make it useful for building flexible interview rigs.
Best For: Compact camera and accessory mounting on rods, tables, and other surfaces.
Pros:
- Supports up to 7.7 pounds.
- Fits rods from 0.55 to 2.36 inches and surfaces up to 2.56 inches thick.
- Offers 1/4-inch-20, 3/8-inch-16, and 1/4-inch locating holes.
- Aircraft-grade aluminum, stainless steel, and anti-slip cushions support stable mounting.
Cons:
- The 7.7-pound capacity is lower than some heavy-duty alternatives.
- It does not include a magic arm or other articulated mounting accessory.
The SmallRig is a practical choice when you need a relatively light, adaptable clamp for an interview camera or nearby accessory. Its threaded mounting options are versatile, while the included clamp body keeps the setup compact.
Heavy-Duty Studio Clamp – NEEWER UA017 Super Clamp
Among camera super clamps for interviews, the NEEWER UA017 stands out for higher load capacity and a supplied 5/8-inch stud. It can grip round poles, rods, tripod legs, or flat desks, making it suitable for mounting larger lights and compatible camera accessories around an interview setup.
Best For: Heavy-duty studio, lighting, and camera mounting where a 5/8-inch receiver is useful.
Pros:
- Supports equipment up to 33 pounds.
- Long lever helps tighten the clamp with less effort.
- Works on round items from 0.2 to 2.4 inches and flat desks up to 1.6 inches thick.
- Includes a 4-inch 5/8-inch stud, 1/4-inch thread, and additional mounting points.
Cons:
- At 22.5 ounces, it is relatively heavy for a portable clamp.
- The 5/8-inch stud may require additional adapters for some camera setups.
The UA017 is the stronger choice when an interview rig includes substantial lighting or other heavy equipment. Its broad grip range and spring-lock stud add flexibility, though the heavier construction is less appealing for minimalist travel kits.
Articulated Interview Mount – TARION Magic Arm Clamp
The TARION Magic Arm combines a super clamp with an 11-inch articulated arm, giving interview shooters more control over camera, monitor, microphone, and light placement. Its single-knob tensioning and interlocking gear joints are designed for quick adjustments while helping supported equipment stay positioned.
Best For: Multi-device interview rigs, overhead mounting, and adjustable positioning of cameras or accessories.
Pros:
- Gear-joint arm supports up to 4.4 pounds without slipping.
- One central wingnut adjusts both ball joints and the center pivot.
- Clamp fits tables, crossbars, and pipes from 0.47 to 2.17 inches.
- Includes 1/4-inch screws, a cold shoe mount, and an action camera adapter.
Cons:
- Its 4.4-pound capacity is lower than the NEEWER UA017’s.
- The articulated arm creates a longer, more involved setup than a clamp alone.
The TARION is a strong fit when adjustability matters more than maximum load capacity. The included accessories and one-knob control make it especially useful for positioning interview lights, monitors, microphones, or compact cameras in a flexible rig.
Heavy-Duty Pick – LEOFOTO MC-60 Multipurpose Super Clamp
For camera super clamps for interviews, the LEOFOTO MC-60 is a compact option when you need a firm mount on a pole, rod, or pipe. Its aluminum-and-stainless-steel construction, 55mm maximum opening, and 5kg capacity suit cameras, monitors, microphones, and LED lights.
Best For: Interview rigs that prioritize clamp strength and broad accessory compatibility.
Pros:
- Supports up to 11lb/5kg while weighing about 160g.
- Clamps onto rods or pipes up to 2.17 inches/55mm.
- Two 3/8-16 holes and a supplied 1/4-to-3/8-inch adapter expand mounting options.
- Built-in cushions help reduce slipping and scratches.
Cons:
- It does not include an articulating arm or ball head.
- The clamp is not water resistant.
The MC-60 is a practical foundation for interview setups, especially if you already have a compatible magic arm or other mounting accessory.
Compact Angle Control – CAMVATE Super Clamp with Mini Ball Head
Among camera super clamps for interviews, the CAMVATE combines a 54mm-opening clamp with a 360-degree mini ball head. It is suited to lighter cameras, monitors, flashlights, and LCD devices where quick angle adjustment matters.
Best For: Lightweight interview accessories and camera mounts needing flexible positioning.
Pros:
- Mini ball head rotates 360 degrees for adjustable framing.
- Three 1/4-20 holes and one 3/8-16 hole offer multiple mounting points.
- Aluminum-alloy construction with black anodized finish.
- Clamp opens to 54mm and supports up to 3kg.
Cons:
- Its 3kg maximum load is lower than heavier-duty alternatives.
- The included articulated head is intended for relatively light setups.
This is a straightforward choice when you want an integrated angle-adjustment head without moving up to a larger magic-arm system.
Flexible Rigging Choice – NEEWER ST16C 11-Inch Magic Arm Clamp
The NEEWER ST16C is a versatile option for camera super clamps for interviews, pairing a super clamp with an 11-inch articulating magic arm. Dual ball heads provide 360-degree rotation and 90-degree tilt, making it useful for positioning a monitor, microphone, camera, or light around an interview setup.
Best For: Interview rigs that need extended reach and frequent angle changes.
Pros:
- 11-inch dual-arm design provides broad positioning flexibility.
- Ball heads offer 360-degree rotation and 90-degree tilt adjustments.
- Mounting hardware includes 1/4-inch and 3/8-inch ARRI locating holes and pins.
- Hand-tightened levers enable tool-free setup and quick locking.
Cons:
- Maximum load is 4.4lb/2kg, so it is not intended for heavy camera packages.
- The 366g assembly is heavier and bulkier than a basic clamp.
- It is not water resistant.
Choose the ST16C when positioning flexibility is more important than maximum payload. Its arm length and dual ball heads can simplify mounting accessories around a seated subject.
How We Picked the Best Camera Super Clamps for Interviews
We focused on the features that matter during real interview production: clamp strength, jaw opening, stated payload, mounting-thread compatibility, arm reach, adjustment range, and overall versatility. We included standalone clamps as well as kits with ballheads, magic arms, cold shoes, or studs because interview rigs vary widely. We also considered whether each design is useful on desks, stands, shelves, crossbars, and other common support surfaces.
Published load ratings are useful starting points, but they do not guarantee safe performance in every position. A long arm, an extended camera, or a sideways load creates more leverage than a compact accessory mounted close to the clamp.
Quick Comparison
| Best For | What to Prioritize |
|---|---|
| Compact camera or monitor mounting | Rigid ballhead, short arm, and secure 1/4"-20 connection |
| Lights and larger accessories | High load rating, broad jaw, and a 5/8-inch stud or 3/8-inch thread |
| Multiple interview stations | Two-pack or four-pack value and compatible accessory arms |
| Location work | Compact construction, fast adjustment, and reliable locking knobs |
| Heavy-duty studio setups | Metal construction, strong jaw contact, and conservative payload use |
Key Buying Factors for Camera Super Clamps for Interviews
Load Capacity and Leverage
Match the clamp to the complete mounted load, not just the camera body. Include the lens, monitor, microphone, light, cable tension, and any arm or adapter. Keep heavy equipment close to the clamp and avoid treating the maximum rating as a recommended everyday limit.
Jaw Opening and Surface Protection
Check the maximum jaw opening against the surfaces you use most. A wide opening helps with thick desks and crossbars, while rubberized contact pads can reduce slipping and protect finished furniture. On fragile or irregular surfaces, use a protective layer and test the grip before mounting equipment.
Threads, Studs, and Accessories
Most camera accessories use 1/4"-20, while many lighting and grip components use 3/8-inch or 5/8-inch connections. Confirm both ends of the clamp or magic arm before buying. A cold shoe is useful for compact microphones or lights, but it should not be mistaken for a heavy-duty mounting point.
Arm Length and Positioning
Longer magic arms provide more placement flexibility but amplify torque and vibration. For interviews, a shorter arm is often steadier for cameras and monitors, while a longer arm can be useful for positioning lights or accessories around obstacles. Favor secure locking joints over maximum reach.
Construction and Locking Hardware
Aluminum construction keeps a rig manageable, but the clamp’s screw, hinge, pads, and locking knobs determine how confidently it holds. Look for smooth adjustment followed by firm locking, and inspect all joints regularly when the setup is used above people or valuable equipment.
Who Should Buy Which Camera Super Clamps for Interviews?
Choose a compact articulated model if you need to mount a small camera, monitor, or microphone on a desk or stand and want minimal bulk. A SmallRig or other heavy-duty clamp kit makes more sense for repeatable studio work, multiple interview positions, or heavier accessories. A NEEWER clamp with a stud is a practical choice when your lighting system uses standard grip hardware.
For maximum flexibility on location, choose a clamp-and-magic-arm combination with both 1/4-inch and 3/8-inch compatibility. If you frequently mount gear to thick surfaces, prioritize jaw opening and contact-pad design over the longest advertised arm. Whatever you select, test the clamp with the complete rig before recording and add a safety tether when equipment is positioned above a subject or crew member.
